Sunday, November 30, 2008

3025 UPDATE



After several days work dismantling the locomotive to lighten it's weight and lower it's height, No. 3025 was lifted off it's wheels and loaded onto a trailer truck on November 25, 2008.



Wayne Hebert and Kjell Benner made two trips to remove the brake rigging, valve gear and rods as well as remove all the fasteners on the spring rigging, etc. prior to returning on November 23rd with Bill Wolf and Dave Conrad for the final preparations. On the 25th, as cranes from Smith Hauling were positioned, the driver pedestal binders were removed. The locomotive was slung front and back. Once a test lift of a couple of inches had been made, the locomotive was lifted about 6 inches and the trailing truck was rolled back to free the tongue. Finally the locomotive was lifted up about 5 feet to clear the driving wheels. It was then swung to the side and set on blocking so the binders could be safely re-installed. The lead and trailing trucks were disassembled sufficiently to remove the wheels. All the wheels were loaded for shipment to a wheel shop for turning.



Once the loading area had been clear of snow (again) by former Knox & Kane employees John Hafer and Chris Slater (who also helped with the dismantling), a heavy hauling "beam" trailer from Barber Trucking was backed into position. The locomotive (sans wheels) was again lifted, swung and lowered onto the trailer. After a bit of repositioning, it was chained down and the cranes were disconnected. The next day it was moved to Barber's yard for final weighing, possibly another repositioning and final measuring for clearances. It is hoped that it will be delivered to Essex before the end of the year.


Special thanks are due to all of the fine people who helped us and were so nice to us while we were in the Kane area including: John Hafer and Chris Slater formerly of the Knox & Kane Railroad, Steve and the crew from Smith Hauling, Tom and John from Barber Trucking, Sterling Watts (who let us use his frontend loader AND installed a furnace in his store room so we could warm up now and then), Bob from Peete M&A Services (who moved, hauled and loaded tons of spare parts for us), Margi and Warren from the Kaneview Motel (who sheltered us), all of the waitresses at Texas Hot Lunch (who kept us fed) and the staff at SUBWAY (who even Wayne couldn't get a laugh out of), (but he kept trying).

J.David





2 comments:

Anonymous said...

Excellent news! While certainly sad for the K&K people, seeing new life for a damaged locomotive must make everyone feel good. thank you for the good news report. Also thanks for telling us lay people just what is required in doing such and endeavor.

Anonymous said...

I grew up in nearby Ledyard, CT, and was raised on trips to see "forty-zero" in Essex. Is the new 3025 going to be a replacement for engine 40 or 97 or is the railroad adding a third steam locomotive?